Email format error
Email cannot be empty
Email already exists
6-20 characters(letters plus numbers only)
The password is inconsistent
Email format error
Email cannot be empty
Email does not exist
6-20 characters(letters plus numbers only)
The password is inconsistent
PNEUMATIC GLOBE VALVE
The ball valve is used for controlling flow and reducing pressure. The butterfly valve is used to control the flow of fluid by moving a disc-shaped plate through an opening, allowing specific flow of various port sizes and pressure standards to pass through
Product introduction:
Pneumatic valves are used in most pneumatic control systems because they can be easily moved and have high flow capacity. Common types include ball valves and butterfly valves. A ball valve is a type of valve designed to redirect fluid flow in a continuous direction. The butterfly valve is designed to control the flow of fluid by moving a disc-shaped plate through an opening, allowing specific flow of various port sizes and pressure standards to pass through.
Pneumatic stop valve is an air driven valve, which can actively control the flow. They have a wide range of configurations and sizes and can communicate with large or small systems. Compared with traditional electromechanical valves, pneumatic stop valves have many advantages, including reliability, high wear resistance, easy maintenance and low operation cost. The pneumatic stop valve is simple and generous in structure, with the best flow rate and energy saving characteristics, and long service life. The valve body can be made of carbon steel, stainless steel or aluminum alloy; It is suitable for corrosion resistance, such as high wear resistance of fresh water, biomass and other liquid media. The valve can be used in various fields such as chemical industry, metallurgy, machinery manufacturing and power production.
Product advantages:
Pneumatic stop valve is a new and innovative product with many advantages. It will be very useful in the water treatment and power industries. The user can use one or two solenoid valves to pressurize its internal air pressure manually or electrically, so as to stop the flow of fluid and switch it to the off mode. The pneumatic stop valve also provides a fast reaction time and will not damage the medium during the closing process.
1. the pneumatic stop valve is driven by electricity or air, so it does not need electricity or compressed air to operate. This is advantageous in medical facilities with frequent power outages, because compressed air must be constantly turned on and off. 2. by using electric or pneumatic valves to isolate the equipment, these technologies eliminate the leakage between the equipment, so as to achieve an air tight and leak free atmosphere.
The pneumatic control valve is used to control the air pressure, flow and temperature in the heating system. Pneumatic ball valve is a 2-way, 2-port valve, which can close the air flow in both directions at the same time. The pneumatic control valve is characterized by a single acting pneumatic directional valve core in the valve body, which opens or closes the operation port according to the movement direction of the rotating input shaft or actuator rod.
Product design:
Pneumatic stop valves are designed to stop the flow of fluid. It can be used as a pilot valve or a control valve to control the full or partial cut-off and closure of gas, liquid, steam and oil under pressure. The pneumatic stop valve can be operated by hand with a simple handle, and all functions are completed in the oil-free state.
The product is designed to operate in systems characterized by light liquids such as mercury and oil. This design uses an internal check valve to prevent reverse flow and to remain closed until pressure is applied. The pneumatic stop valve can be used in the pneumatic and liquid medium pipelines running through the industrial plant, making it an important part of the instrument system.
INSTRUCTION
- Solenoid valve on the top: Voltage 220V, Power off, Connect Power Line
- Solenoid valve on the bottom: Voltage 220v, power on, Connect Power Line
- This is Hydraulic Pressure
